-
Straight Bore 1/2" entry 1"-14 NPS (NPS = National Pipe Straight/Parallel) threaded, 14 threads/sq. inch
-
The OD of the threads of T5 is .998"OD (Whereas, T4 nozzles are slighly larger at 1.003" OD) Note that 1" pipe is always measured based on the outside diameter (OD), and pipes less than 1" are measured on their inside diameter (ID). Thus a T5 nozzle is slightly smaller in size than a T4, but you cannot tell this visually as they are so close. Most nozzles sold are T4 as it is rare to actually require a T5, but due to confusion between the two, both T4 and T5 are threaded in such a way that both will screw into a 3/4" holder.
-
OAL (Overall Length): 2.0"
-
Item #: T5 Series, You Pick The Bore Size
-
Boron Carbide Nozzle, Aluminum Jacket (Steel is available, see below)
-
Lightweight, Reduces User Fatigue
-
Made in the USA - Support American Manufacturing!
- Longer Life = Reduced Down Time
-
Boron Carbide Nozzle, Aluminum Jacket, (Steel Jackets Available Below)
-
Use this page to order all T5 Straight Bore Series Nozzles, 2.0" Length:
-
21616 (1/8 Bore)
-
31616 (3/16 Bore)
-
41616 (1/4 Bore)
-
51616 (5/16 Bore)
-
61616 (3/8 Bore)
-
71616 (7/16 Bore)
-
81616 (1/2 Bore)
-
Boron Carbide Nozzles Are The Longest Lasting Nozzles Commercially Available & Outlast Tungsten Carbide By 3-5 Times!
-
Longer Life = Reduced Down Time
-
Lightweight, Reduces User Fatigue
-
Made in the USA - Support American Manufacturing!
- Once you use Boron Carbide nozzles, you won't go back.
- Volume Pricing Available, just ask us! ( 10 or more nozzles)