{"title":"Hexagonal Boron Nitride HBN Collection","description":"","products":[{"product_id":"hexagonal-boron-nitride-powder-order-page-781","title":"Hexagonal Boron Nitride (HBN) Powder Order Page - All Sizes","description":"\u003cp\u003e\u003cstrong\u003eHBN:\u003c\/strong\u003e  Use this page to order 1lb quantities of Hexagonal Boron Nitride powder.  You may choose from a variety of sizes:  -5 or -10 micron (our largest particle size of 6-7 micron), as well as a very fine 0.5 to 1.0 micron powder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLead Time:\u003c\/strong\u003e  1-3 business days plus transit time. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is Hexagonal Boron Nitride Powder?\u003c\/strong\u003e  This product has structure and properties similar to graphite.  Hexagonal boron nitride powder is one of the most popular dry lubricants available today, due mostly to its lubricant properties and its inertness to molten metals and salts. It is therefore often used as a mold release agent.\u003c\/p\u003e\n\u003cp\u003eHBN (White Graphite) also has high thermal conductivity.  This means it will act as a heat sink, helping to keep parts cooler.  It will also improve the strength and hold ability of powder composites, and has high load bearing properties. HBN powder is platelet shaped and of single crystal - \"Monocrystalline\", and very soft.  (Polycrystalline Boron Nitride would be Wurtzite Boron Nitride - and is very hard).\u003c\/p\u003e\n\u003cp\u003eWe generally sell Hexagonal Boron Nitride as a dry powder, but upon request, we can provide it as either a thick paint or thin paste (spray able), convenient for use with tooling and stamping machined parts.  \u003ca href=\"http:\/\/sandblastingabrasives.com\/boron-nitride-high-temperature-coatings-release-agents-800.html\"\u003eYou may order from four different pastes on this page\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor those of you mixing your own formulation, note that HBN is always measured by weight, not volume.  Therefore, a 12% HBN by weight is ~1 lb of HBN per gallon of water.\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSizing Nomenclature:\u003c\/strong\u003e   A -5 (Negative Five) micron material will have the majority of its particles smaller than 5 micron, generally having a D50 of 2-3 micron.  Think of D50 as an average, although technically, the D50 is considered to be the average particle diameter by mass.  (D50 = Mass-median-diameter (MMD)). \u003c\/p\u003e\n\u003cp\u003eIn the same way, a -10 (Negative Ten) micron material will have the majority of its particles smaller than 10 micron, generally having a D50 of 4-7 micron.\u003c\/p\u003e\n\u003cp\u003eThese powders are not \"graded\" powders, which means that the D50 will vary somewhat from lot to lot. If you have specifications of sizing which must be met, be sure to communicate that to us.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePremium (Cosmetic) Grade\u003c\/strong\u003e is typically used in the cosmetics industry and has the same general chemistry as Standard Grade (although it does have a slightly higher purity of 99.6% vs 99% for Standard Grade).  It is just put through an additional cleaning process to remove any element (very small percentage) of dark particles.  It is hygroscopic in nature and must be handled accordingly.\u003c\/p\u003e\n\u003cp\u003eCosmetic grade HBN is only available in the -10 micron size.  It is not a food safe product.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHandling Warning: \u003c\/strong\u003e This material is so fine it is hygroscopic.  Thus the particle size will increase due to \"attraction\" or \"clumping\" of the particles together, once exposed to air and humidity.  Make sure you use the material immediately after opening, package it tightly, and store it in a temperature and humidity controlled environment.  Once it begins conglomerating, it will be difficult for you to \"unstick\" the particles.  Therefore, make sure you handle this material appropriately.  We can package it in a variety of ways to help you with your particular application. \u003c\/p\u003e\n\u003cp\u003eThis material is processed in a diamond laboratory, where the temperature and humidity are controlled.  Make sure you take steps to preserve the quality of this powder once you open your package.\u003c\/p\u003e\n\u003cp\u003eSecond, since HBN is extremely fine, fluffy material, it can cause respiratory tract infections.  So try to minimize inhalation.  (\u003cspan style=\"font-family: 'Arial','sans-serif'; font-size: 10pt;\"\u003eNo specific intervention is indicated as the compound is not likely to be hazardous by inhalation.  However, if symptoms occur, consult a physician.)  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Examples: \u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMold and die release agent\u003c\/li\u003e\n\u003cli\u003eInsulator\u003c\/li\u003e\n\u003cli\u003eDry lubricant\u003c\/li\u003e\n\u003cli\u003eHot pressed goods such as shapes and composites with high thermal conductivity\u003c\/li\u003e\n\u003cli\u003eHigh electrical resistively and machinability.\u003c\/li\u003e\n\u003cli\u003eCeramic Additive\u003c\/li\u003e\n\u003cli\u003eCosmetics \u0026amp; Makeup (Order the \u003cstrong\u003eCosmetic Grade -10 micron\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003eComposites and high tech matrixes\u003c\/li\u003e\n\u003cli\u003eHeat sink, thermal transfer\u003c\/li\u003e\n\u003cli\u003eMold Release Agent\u003c\/li\u003e\n\u003cli\u003eMolding into crucibles\u003c\/li\u003e\n\u003cli\u003ePaints and Coatings\u003c\/li\u003e\n\u003cli\u003eBullet Coatings (\u003cstrong\u003eDry Lubricant used in a vibratory tumbler, order the -5 micron\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003eGun Barrel Coating (\u003cstrong\u003eReduces Friction, dissipates heat, may extend life of barrel.  Order the -5 or -10 micron\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003eCoatings In General:  The HBN powder will work at ~1350 degrees C (2462 F) as a max temperature. \u003cstrong\u003e In most cases, a -10 powder will be more stable at high temperatures, and mixes much better into a coating than other sizes.  \u003ca href=\"http:\/\/sandblastingabrasives.com\/boron-nitride-high-temperature-coatings-release-agents-800.html\"\u003eFor premade HBN coatings\/pastes, see this page for ordering\u003c\/a\u003e.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e​\u003cstrong\u003eShipping Information:\u003c\/strong\u003e\u003cspan style=\"font-family: Arial; font-size: small;\"\u003e  -1 or 2 lb orders will generally ship in 24 hours, packaged in a plastic container. Other quantities will have a 3 day lead time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSurface Area:  7.4 m2\/g\u003c\/li\u003e\n\u003cli\u003eNickname:  White Graphite\u003c\/li\u003e\n\u003cli\u003eTap Density  0.45\u003c\/li\u003e\n\u003cli\u003eGrades Available:  Standard and Cosmetic Grade\u003c\/li\u003e\n\u003cli\u003eHBN powder is platelet shaped and of single crystal - \"Monocrystalline\", and very soft. \u003c\/li\u003e\n\u003cli\u003ePhysical Data:  Similar to Graphite\u003c\/li\u003e\n\u003cli\u003eThermal Conductivity160 - 200 W\/mk:  High: HBN powder will work at ~1350 degrees C as a max temperature.  Thermal conductivity is measured as Watts per Meter- K.\u003c\/li\u003e\n\u003cli\u003eTypical Packaging:  10 kg bags (22 lbs), then four bags stacked inside a fiber drum (88 lbs per drum), 4 drums per pallet.  We can pack per your request.\u003c\/li\u003e\n\u003cli\u003e1 Pound Packaging:  1 lb per plastic jar.\u003c\/li\u003e\n\u003cli\u003eColor:  White in its dry state\u003c\/li\u003e\n\u003cli\u003ePurity:  99.0% (Standard Grade); 99.6% (Premium or Cosmetic Grade)\u003c\/li\u003e\n\u003cli\u003eStructure: Hexagonal\u003c\/li\u003e\n\u003cli\u003eBulk Density:  0.4 g\/cc3\u003c\/li\u003e\n\u003cli\u003eFlash Point:  Will not burn.\u003c\/li\u003e\n\u003cli\u003eFire \u0026amp; Explosion Hazards:  None\u003c\/li\u003e\n\u003cli\u003ePricing is based per pound, 1 lb is the minimum order\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/sandblastingabrasives.com\/help.php?section=contactus\u0026amp;mode=update\"\u003eNeed A Custom Quote?\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e..\u003c\/p\u003e\n\u003chr\u003e","brand":"Sandblastingabrasives.com","offers":[{"title":"-5 Micron, 1 lb","offer_id":44852454424765,"sku":"HBNPowder","price":99.0,"currency_code":"USD","in_stock":true},{"title":"-8 Micron, 1 lb","offer_id":44852454457533,"sku":"HBNPowder","price":99.0,"currency_code":"USD","in_stock":true},{"title":"-10 Micron, STANDARD Grade 1 lb","offer_id":44852454490301,"sku":"HBNPowder","price":95.16,"currency_code":"USD","in_stock":true},{"title":"-10 Micron COSMETIC Grade, 1 lb","offer_id":44852454523069,"sku":"HBNPowder","price":117.6,"currency_code":"USD","in_stock":true},{"title":"6 to 7 Micron (Our largest particle size), 1 lb","offer_id":44852454555837,"sku":"HBNPowder","price":111.6,"currency_code":"USD","in_stock":false},{"title":"0.5 to 1.0 Micron (Our finest size), 1 lb","offer_id":44852454588605,"sku":"HBNPowder","price":148.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/6871\/1357\/files\/image_acb9863c-72e6-48c1-b95a-5c0f615f9710.jpg?v=1742914488"},{"product_id":"boron-nitride-high-temperature-coatings-release-agents-800","title":"High Temperature Boron Nitride Coatings \u0026 Release Agents, sold by the gallon","description":"\u003cp\u003eOffering both thick and thin HBN coating compositions, sold by the gallon (above).   Details on our 4 main compositions are below, please scroll down.\u003c\/p\u003e\n\u003cp\u003eOur high temperature coatings are non flammable and stable.  \u003cspan style=\"background-color: #ffff00;\"\u003eBY DEFAULT, all our coatings will be water based, such as all the coatings you can order off this web page.  However, they can be formulated with oil or ethanol as a custom product for you\u003c\/span\u003e.  We can also formulate lubricants blended with rust inhibitors, please see the information at the bottom of this page.\u003c\/p\u003e\n\u003cp\u003eWhy use HBN?  Hexagonal Boron Nitride is one of the most popular dry lubricants available today, due mostly to its lubricant properties, thermal conductivity (heat sink), and its inertness to molten metals and salts.  It is often incorporated into a paste or a thin sprayable composition, for use in high temperature coating applications, such as tooling and stamping machined parts, extrusion presses, mold release, etc.  Excellent for Aluminum, Magnesium, Zinc and Lead foundry applications.  It is also white in color, so you do not get black all over everything, assuming you were previously using graphite.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it applied? \u003c\/strong\u003e It is generally painted on with a common paint brush, or sprayed on if formulated for a spray gun, but it will depend on your application and how much you water it down.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is it sold?\u003c\/strong\u003e  It is formulated by the gallon, and therefore sold by the gallon.  Discounts available with 10 or more gallons purchased.  Minimum purchase is one gallon.  You may order one gallon quanties on this page.  Details on each for main formulas are below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the viscosity?\u003c\/strong\u003e  Depends on your application.  This will vary from light (for use in a spray gun) to very thick.  If you are using a water based formula (water is our default base), then you can always dilute the coating down with tap water to your desired thickness.  If you are using the coating for multiple purposes or applications, then consider buying a thick paste and diluting it down prior to use, based on your intended application.  (If you are buying a custom oil or ethanol based coating, then dilute wiith oil or ethanol).  Cps stands for \"Centipois\".  This is the measurement of viscosity\/ thickness of liquid.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Boron Nitrde content?  \u003c\/strong\u003eThis will vary from 5 to 40%\u003cstrong\u003e.  We do not reveal our formula.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow will the coating stick to my parts?  \u003c\/strong\u003eThese coatings are designed with binders that cause them to stick to parts, so you spray it on, paint, or dip your parts into it, and then as it wears off you re-apply as needed.  The binders cause it to stick.  Users will often spray it on, then dry it under heat to get it to stick, so they can continue their process.  One or more coatings can be used, as desired.  Reapply as needed.  We can formulate coatings with NO binders, if desired, \u003ca href=\"https:\/\/sandblastingabrasives.com\/help.php?section=contactus\u0026amp;mode=update\" target=\"_blank\"\u003eplease contact us for a quote.\u003c\/a\u003e  (Without binders, you should be able to wash the coating off your part fairly easily.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I want to make my own coating?\u003c\/strong\u003e  \u003ca href=\"http:\/\/sandblastingabrasives.com\/hexagonal-boron-nitride-powder-order-page-781.html\"\u003eThen please order a lb or more of HBN powder here\u003c\/a\u003e\u003ca href=\"http:\/\/sandblastingabrasives.com\/hexagonal-boron-nitride-powder-order-page-781.html\" target=\"_blank\"\u003e.\u003c\/a\u003e  Usually, the -10 powder is the easiest to blend into a coating.\u003cstrong\u003e\u003ca id=\"HBN Formulations Offered\" name=\"HBN%20Formulations%20Offered\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca name=\"HBN%20Formulations%20Offered\"\u003eMain Formulations \u0026amp; Boron Nitride Content \u003c\/a\u003e- such as those you can order at top of this page.  They will all contain binders, and be water based by default:  \u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMold Casting Release Formulation - up to 10% HBN.  This will have a viscosity ranging from 150 - 200 cPS, and is suitable for spraying.\u003c\/li\u003e\n\u003cli\u003eAnti-Wetting Coating for Metal, Ceramics \u0026amp; Graphite - thin composition - up to 25%.  \u003c\/li\u003e\n\u003cli\u003eGeneral Purpose High Temperature Coating - thicker composition - up to 25% BN.  This is basically a paste: viscosity range will be ~2,500 ~ ~2,800 cPS. More like a heavy batter.  You can water this down with tap water to a sprayable coating if desired.  Cps stands for \"Centipois\".  This is the measurement of viscosity\/ thickness of liquid.\u003c\/li\u003e\n\u003cli\u003eHeavy Duty thick composition for coating parts that are moving in molten metal - up to 40% BN.  This is a very thick paste - having a viscosity range of ~5,000  ~  ~6,000 cPS.  If you order this product, please tell us what your intended application will be, including your maximum temperature it will need to protect so we can make sure it will work for you.  You can water this down with tap water to a sprayable coating if desired.  Cps stands for \"Centipois\".  This is the measurement of viscosity\/ thickness of liquid.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the cost for CUSTOM pastes and coatings?  \u003c\/strong\u003eThe percentage of HBN in the paste will, among other things, determine price.  \u003ca href=\"http:\/\/173.236.50.84\/help.php?section=contactus\u0026amp;mode=update\"\u003ePlease \u003c\/a\u003e\u003ca href=\"http:\/\/sandblastingabrasives.com\/help.php?section=contactus\u0026amp;mode=update\"\u003e\u003cstrong\u003eContact Us\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/sandblastingabrasives.com\/help.php?section=contactus\u0026amp;mode=update\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/a\u003ewith the following information and we will quote you a custom coating:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhat is the maximum operating temperature the coating will be exposed to?\u003c\/li\u003e\n\u003cli\u003eWhat is your application, how will you use it, what type of machine or surface are you applying it to, etc.?\u003c\/li\u003e\n\u003cli\u003eHow thick (viscous) do you desire the paste to be (if known)?\u003c\/li\u003e\n\u003cli\u003eHow many gallons do you require a quote on?\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable align=\"center\" border=\"1\" cellpadding=\"2\" cellspacing=\"0\" style=\"height: 195px; width: 516px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003eBoron Nitride Powder Content:\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eVaries from 5% to 36% depending on specific application.\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eVaries from white to light brown.\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003eDensity:\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eVaries from 0.75 g\/cm3 to 1.2 g\/cm3.\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eFrom very light (suitable for spray guns) to heavy paste, available for entire range of Boron Nitride content.\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003eLiquid Base:\u003c\/strong\u003e \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eWater, Oil or Ethanol.\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1350 (C max.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003eSpecial Product Enhancements:\u003c\/strong\u003e \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eAre available on request including formulation with Alumina as a binding agent.\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003ePH Level Range:\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSpecialized and Custom Formulated Lubricants Containing Boron Nitride:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eBNBL-FG: FG coatings are applied where fretting and galling is a problem (such as splines, universal joints and keyed bearings).  FG coatings will not collect dirt and debris like greases and oils.\u003c\/li\u003e\n\u003cli\u003eBNBL-ECP: Extreme contact pressures. The BN-ECP provides lamellar structure oriented in parallel to the sliding surface resulting in high load-bearing capabilities in a low shear stress environment.  Among applications is Superplastic Metal Forming that involves extensive deformation.  ECP product offers controlled adhesion, easy removal after forming and minimizes build-up on dies.\u003c\/li\u003e\n\u003cli\u003eBNBL-ICE: Used where smooth running in a clean operation is desired (piston, camshaft).\u003cbr\u003eUsed as a piston ring coating to optimize engine performance during break-in period. \u003c\/li\u003e\n\u003cli\u003eBNBL-HTL:  High temperature applications.  HTL Boron Nitride exhibits high tolerance to temperature and oxidizing atmosphere environments, whereas liquid lubricants typically will not survive. A typical application include fasteners which are easily tightened and unscrewed after a long stay at high temperatures.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Information:\u003c\/strong\u003e  Due to ISO Quality Control procedures, this material takes 3 business days from the date of order, to the date of shipping.  Please keep this in mind when ordering.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/173.236.50.84\/help.php?section=contactus\u0026amp;mode=update\"\u003ePlease \u003c\/a\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/sandblastingabrasives.com\/help.php?section=contactus\u0026amp;mode=update\"\u003eContact Us\u003c\/a\u003e for custom quotes so that we can quote accurately given the fluctuating tariff situation.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Sandblastingabrasives.com","offers":[{"title":"Mold Casting Release, Default","offer_id":44852466679997,"sku":"HBN Coating - Sold By The Gallon","price":136.8,"currency_code":"USD","in_stock":false},{"title":"Anti-Wetting Coating Thin","offer_id":44852466712765,"sku":"HBN Coating - Sold By The Gallon","price":178.8,"currency_code":"USD","in_stock":false},{"title":"General Purpose Thick","offer_id":44852466745533,"sku":"HBN Coating - Sold By The Gallon","price":178.8,"currency_code":"USD","in_stock":false},{"title":"Heavy Duty Very Thick","offer_id":44852466778301,"sku":"HBN Coating - Sold By The Gallon","price":268.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/6871\/1357\/files\/image_e1895f18-9f3e-4704-9431-91ec7365af53.jpg?v=1739785089"},{"product_id":"specialized-lubricants-containing-boron-nitride-816","title":"Specialized Lubricants Containing Boron Nitride","description":"\u003cp\u003e\u003cstrong\u003eSpecialized Lubricants Containing Boron Nitride \u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eThis line of lubricants uses Hexagonal Boron Nitride powder as a key ingredient. These lubricants contain fine particles of Boron Nitride powder, plus a binder. After application and proper curing, they become bonded to the metal surface and form a white or light grey solid film.  These dry film lubricants also contain special rust inhibitors  which offer exceptional corrosion protection.\u003c\/p\u003e\r\n\r\n\u003cp\u003eBoron Nitride based Lubricants are helping to address the latest worldwide trend in environmental regulations which is to minimize\/prohibit the use of ingredients that may generate phosphorous and\/or sulfur fumes and residues. BNBL products should be considered as an effective alternative to Molybdenum Disulfide (MoS2) based products which are among the products affected by the new regulations.\u003c\/p\u003e\r\n\r\n\u003col\u003e\r\n\t\u003cli\u003eBNBL-FG: FG coatings are applied where fretting and galling is a problem (such as splines, universal joints and keyed bearings).  FG coatings will not collect dirt and debris like greases and oils.\u003c\/li\u003e\r\n\t\u003cli\u003eBNBL-ECP: Extreme contact pressures. The BN-ECP provides lamellar structure oriented in parallel to the sliding surface resulting in high load-bearing capabilities in a low shear stress environment.  Among applications is Superplastic Metal Forming that involves extensive deformation.  ECP product offers controlled adhesion, easy removal after forming and minimizes build-up on dies.\u003c\/li\u003e\r\n\t\u003cli\u003eBNBL-ICE: Used where smooth running in a clean operation is desired (piston, camshaft).  Used as a piston ring coating to optimize engine performance during break-in period. \u003c\/li\u003e\r\n\t\u003cli\u003eBNBL-HTL:  High temperature applications.  HTL Boron Nitride exhibits high tolerance to temperature and oxidizing atmosphere environments, whereas liquid lubricants typically will not survive. A typical application include fasteners which are easily tightened and unscrewed after a long stay at high temperatures.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eHow Do I Obtain A Quote? \u003c\/strong\u003e  Please \u003ca href=\"http:\/\/sandblastingabrasives.com\/help.php?section=contactus\u0026amp;mode=update\"\u003e\u003cstrong\u003eContact Us\u003c\/strong\u003e\u003c\/a\u003e\u003ca href=\"http:\/\/sandblastingabrasives.com\/help.php?section=contactus\u0026amp;mode=update\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/a\u003eand we will quote you a custom coating.  Please provide as much detail about your application as possible.\u003c\/p\u003e\r\n\r\n\u003col\u003e\r\n\t\u003cli\u003eWhat is the maximum operating temperature the coating or lubricant will be exposed to?\u003c\/li\u003e\r\n\t\u003cli\u003eWhat is your application, how will you use it, what type of machine or surface are you applying it to, etc.?\u003c\/li\u003e\r\n\t\u003cli\u003eHow thick (viscous) do you desire the paste to be (if known)?\u003c\/li\u003e\r\n\t\u003cli\u003eHow many gallons do you require a quote on?\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eGeneral Boron Nitride Coatings Information:\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003ctable align=\"center\" border=\"1\" cellpadding=\"2\" cellspacing=\"0\" style=\"height:195px; width:516px\"\u003e\r\n\t\u003ctbody\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003eBoron Nitride Powder Content:\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\u003cstrong\u003eVaries from 5% to 36% depending on specific application.\u003c\/strong\u003e\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e \u003c\/strong\u003e\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\u003cstrong\u003eVaries from white to light brown.\u003c\/strong\u003e\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003eDensity:\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\u003cstrong\u003eVaries from 0.75 g\/cm3 to 1.2 g\/cm3.\u003c\/strong\u003e\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003eViscosity:\u003c\/strong\u003e \u003c\/strong\u003e\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\u003cstrong\u003eFrom very light (suitable for spray guns) to heavy paste, available for entire range of Boron Nitride content.\u003c\/strong\u003e\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003eLiquid Base:\u003c\/strong\u003e \u003c\/strong\u003e\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\u003cstrong\u003eWater, Oil or Ethanol.\u003c\/strong\u003e\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003eApplication Temperature:\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\u003cstrong\u003e1350 (C max.)\u003c\/strong\u003e\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003eSpecial Product Enhancements:\u003c\/strong\u003e \u003c\/strong\u003e\u003c\/td\u003e\r\n\t\t\t\u003ctd\u003e\u003cstrong\u003eAre available on request including formulation with Alumina as a binding agent.\u003c\/strong\u003e\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\t\u003ctr\u003e\r\n\t\t\t\u003ctd\u003e\u003cstrong\u003e\u003cstrong\u003ePH Level Range:\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/td\u003e\r\n\t\t\u003c\/tr\u003e\r\n\t\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\r\n\u003cp\u003e \u003c\/p\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eMain Formulations \u0026amp; Boron Nitride Content:  \u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003col\u003e\r\n\t\u003cli\u003eMold Casting Release Formulation - up to 10% HBN.\u003c\/li\u003e\r\n\t\u003cli\u003eAnti-Wetting Coating for Metal, Ceramics \u0026amp; Graphite - thin composition - up to 25%\u003c\/li\u003e\r\n\t\u003cli\u003eGeneral Purpose High Temperature Coating - thicker composition - up to 25% BN\u003c\/li\u003e\r\n\t\u003cli\u003eHeavy Duty thick composition for coating parts that are moving in molten metal - up to 40% BN.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\r\n\u003cp\u003e\u003cstrong\u003eShipping Information:\u003c\/strong\u003e  Due to ISO Quality Control procedures, this material takes 3 business days from the date of order, to the date of shipping. \u003c\/p\u003e\r\n","brand":"Sandblastingabrasives.com","offers":[{"title":"Default Title","offer_id":44852478607549,"sku":"HBNLubricantsSpecialized","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/6871\/1357\/files\/image_b35c48a6-9b2f-4c76-ba84-aef80c6a7e2e.jpg?v=1739869477"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/6871\/1357\/collections\/nopictureavailable-02_a7468969-eb45-4b65-99ae-7a2e5618fc89.png?v=1743102896","url":"https:\/\/sandblastingabrasives.com\/collections\/hexagonal-boron-nitride-hbn-collection.oembed","provider":"Sandblastingabrasives.com","version":"1.0","type":"link"}