Home :: Anti-Skid/Traction

Anti-Skid/Traction

  • Aluminum oxides and silicon carbides are the most commonly used abrasive for antiskid purposes.  
  • Crushed bottle glass in very coarse sizes like 1020 is also used for anti slip coating applications, generally also broadcast onto your surface.
  • Suggested Grit Sizes - use Coarse Sizes Such As:  16, 20, 24, 30, 36, 46, 54
  • Glass Bead (actual round beads) are also used for anti slip and are great with clear coatings where pigmentation is not desired.
  • If ordering Black Silicon Carbide, check out the 16/36 grit.  This is a special blend of grits for broadcasting on top of concrete and can be ordered online.  It will also sparkle in the sunlight.
  • White Aluminum Oxide will not usually change the color of your resin/paint/epoxy coating.  Crushed bottle glass will also generally not change your pigment but is not available for sale online in small quantities.
  • Sinterblast (Sintered Aluminum Oxide) is one of the most economical media to use for anti-skid, but is dark in color, appearing black in coarser sizes.
  • Other abrasives can also be used such as pecan and walnut shells, glass beads, etc.
  • Lighter weight abrasives (glass bead, walnut shell, plastic beads, pecan) will usually suspend in your coating, and in general, you thus use less per sq. ft.  (Start testing with 3 lbs per 1,000 sq. ft.)
  • Heavier weight abrasives such as aluminum oxides should be halfway embedded into your coating when dry, and thus halfway protruding when your coating is dry.  Therefore, if your coating is very thick, you need a coarser grit size.  Thinner coatings will require a finer grit size.  As a starting point, heavier abrasives are generally broadcast at 5-7 lbs per 1000 sq. ft.  
  • NOTE:  Some flooring systems are just that - "systems" - and the aggregate is sandwhiched between layers, and may be required in a much larger amount of material, such as 4 lbs per sq ft for example.  Contact the manufacturer of your flooring system and then we can quote the aggregate once you know how much you require.  It all depends on the environment the floor is being made for.  Slippery, fat laden meat processing plants for example, will require very coarse grit sizes, and in large amounts.  
  • To make concrete sparkle as well as give it anti slip properties, we suggest broadcasting our 16/36 Black Silicon Carbide blend, applied at 1/4 lb. / square foot.  However, you can always order a straight 16 grit for more anti slid purpose, or tone it down to a straight 36 grit for less antislip grip.  If you are unsure, go with the 16/36 blend.
Brown Aluminum Oxide, Common Antiskid Grades
Brown Aluminum Oxide, Common Antiskid Grades
1 products
Sinterblast, Common Antiskid Grades
Sinterblast, Common Antiskid Grades
1 products
Walnut Shell, Common Antiskid Grades
Walnut Shell, Common Antiskid Grades
1 products
White Aluminum Oxide, Common Antiskid Grades
White Aluminum Oxide, Common Antiskid Grades
1 products

Products

Silicon Carbide (Black) Grit Abrasive, 25lbs or More, All Grades To Choose From
$84.50
 
(1 reviews)  

Aluminum Oxide, Brown Fused Sandblasting Abrasive, COARSE Grades 8 through 240, 49 lbs or More
$99.98
 
(4 reviews)  

Silicon Carbide (Black) Grit Abrasive, 49 lbs or More, Coarse Grades
$123.41
 
(7 reviews)  

Aluminum Oxide (Black Sintered), 16 through 100 Grits
$68.00
 
(2 reviews)